Showing posts with label bias strips. Show all posts
Showing posts with label bias strips. Show all posts

Saturday, June 12, 2010

More About the Dreaded "A" Word



For accurate placement on the background fabric, I cut my background fabric a half inch larger all the way around.  For example, these blocks finish at 12 inches, so a 12 and a half inch square is cut.  I cut mine at 13 and a half because the appliqué does draw it up a bit.  So after it's done, I can cut it down to an accurate 12 and a half inch square.


I iron it in half, turn it, and iron another crease so I have a four squares ironed into my fabric.  Then, I iron creases from corner to corner.  This gives me a guide for placement of the appliqué pieces.

You may have noticed that all my leaves aren't perfectly symmetrical and they're all different fabrics.  I like the organic look -- no two leaves are ever the same in real life either.  And I'm relieved from having to make 12 exactly perfectly matching leaves.

I traced the design from the pattern onto baking parchment.  I line it up with the ironed-in creases, then place my pieces with tweezers.  I have these nifty little appliqué pins to hold them in place while I stitch.  They're nice because they're so tiny, the thread doesn't catch them when I'm sewing.

I use a small needle and thread that matches the appliqué, not the background.  I bury the knot under the appliqué, then do a blind stitch catching the fold of the appliqué.

To make the stems, I have this cool little pen.  It has a "magic" potion in it (don't know what it is but I really hope it's not something that will make my quilt rot in 20 years).

I cut the bias strip -- the finished piece was a little larger than a quarter inch, so I cut them at 3/4 of an inch.

Then I put my ruler down, leaving a scant quarter inch and "marked" it with the pen.  The liquid makes it easy to fold, then press with a hot iron.  I turned it and did the other side.

This pen is also useful for turning edges on labels, or anything else.  The wet line turns really easily. And I can make bias strips any size -- I'm not limited to the sizes the strip-makers make.

Next:  Those *&#@;$!!! little circles.