Showing posts with label fusible web. Show all posts
Showing posts with label fusible web. Show all posts

Friday, February 27, 2015

Spring: it's coming again

Actually it came and went.  I wrote this post last April and just finished it.

Okay -- maybe not here in Wisconsin.  But for most of the northern hemisphere, it is.  My guild, Lodi Valley Quilters Guild, has a spring challenge each year that coincides with Quilt Academy.  A choice of three classes are offered from a long list of possibilities; it's a really big deal.  I'm on the committee (I redesigned the brochure this year) so I felt more than obligated to finish my challenge for the quilt display we did with it.

The challenge fabric was this floral.  
 Totally not my style.  But I had to use some of it.  On the front.  Hmmm...

So I got this idea of spring animals frolicking in the flowers. I ironed fusible web to the entire fat quarter.  Then I sat at a meeting and later in front of the TV and cut out individual flowers.  I made it easy on myself and used textile glue to fasten the sheep parts to the background for quilting.




I pinned a thin cotton batt to the back and stitched all the lambs' wool with Aurifil thread.  Here are the finished lambs before I cut away the batting and layered it with the final wool batting.


I will post a photo of the finished piece in a week or two after the show on April 5.  I might have some fun photos of the guild members then too.

Okay, this is not true.  I will post the finished project sometime this month.  OK.  I lied again.  It has been nearly a year and here it is!

Thursday, April 25, 2013

Cuts and Pleats


 Above are the two pieces I chose to use for the cut and pleat portion of this project.  Instead of using the two that were most alike, I used the two that I liked the most.

I ironed fusible to each piece, then stacked them with one on top of the other, fusible sides on each facing down.  I used WonderUnder instead of MistyFuse because I ran out and the only store that happened to be open stocked WonderUnder.  It's not my favorite fusible -- it's heavy (I used the lightest weight) and I have the darndest time removing the backing paper.

I cut the strips a little more than half an inch wide -- about 5/8 inch.  Then I carefully put them onto a piece of plain cotton, two at a time.  I was very careful to keep them in order.


The top piece is the finished fused strips.  I really like it just like this.  I wonder if I would lose the pattern if I tried stitching together strips cut from two similar pieces.  Would too much get lost in the seam allowances?

And the finished pleated piece.  I'm not sure where I'm going to go with it from here.  I was thinking of making a bag, but it will be way too big a bag for me -- more like a tote.

I'm also wondering if stitching down the pleats going one direction on the top and another on the bottom would look good.  Or maybe one direction on the top and bottom then another in the middle?

Also, next time, instead of using the two pieces I like the most, I would use the one I like most and the one I like least and do the pleats on the one I like least because so much of the pattern is lost in the pleat.

I'm linking up with Nina Marie at Off the Wall Friday.

Thursday, May 24, 2012

AB-liqué Research, Ohhhh Myyyyyy...

I had to do a little research to get it right.  I've detailed my efforts to buff up Poseidon with inks and thread in previous posts and I wanted his abs to match the rest of his physique -- at least the parts not covered up by his clamshell-chariot.

Abdominal muscles
So I went online and searched for some images to use as a guide.

Some of the images were a bit more graphic than I was looking for.

But a couple were just right.


So here is Poseidon with his trident and the clamshell-chariot covering his pertinent parts -- the fresco I took my inspiration from had him riding in the buff (ha!) with waves providing camouflage.  But I didn't want to take a chance on the water draining away and exposing anything that might scare the youngsters.


I'm not thrilled with the way the fused fabric shows the lines from the seams underneath.  Next time, I will be sure to cut away the underneath.  It's not as bad as it looks in this photo.  Does anyone have any suggestions for making it less noticeable?


And for Beth, the backside.  

I'm linking up with Angie's blog -- click here to see other appliqué projects.

Saturday, April 10, 2010

Ta Da! Jasmine!


"Jasmine" -- WIP fused hand-dyes

After all the big pieces are in place, it's time to do the little pieces.  After tacking most of it together with the edge of a hot iron, the large pieces of freezer paper can be carefully removed using the tweezers.  Then the tiny pieces can be placed using the tracing paper as a guide.  I laid the tracing paper over  as a guide and carefully set them on the appliqué.  It's best to remove the freezer paper before placing them -- I left it on for the pictures, but it's really hard to remove it without pulling up the lightly fused bits.  Also, tracing paper doesn't work as well as parchment under the iron -- I think it has a lower "smoke point"  (don't ask me how I know...).  I may try using a piece of parchment for tracing next time.

Next is the hard part -- choosing the background.

Sunday, February 14, 2010

Valentine's Day Wishes

"Burning Desires"

Work in Progress
Painted and foiled fusible web on cotton sateen and hand-dyed cotton

Wednesday, December 2, 2009

Twinchies Creation

So when I unveiled them, I announced that I was going to 'splain how I made them (see the original post here). So here you go:
First I painted fusible web -- I tried out a number of different kinds, but that's another post -- for this project, I used WonderUnder and Setacolor Shimmer paints. I used the Setacolors because they were new and I wanted to play with them.
I cut the fusible into strips and ironed it to some plain white cotton sateen with a piece of parchment paper on top -- I didn't want to take a chance on getting any of this stuff stuck to my iron. Then I ironed this to Peltex - no batting. I also used some bright gold foil to liven them up. I just added it with a hot iron right on top of the painted fusible.
I draped over some multi-colored ribbon/yarn and quilted with turquoise thread in an all over stipple. I fused some plain white cotton to the back. I cut two inch strips and then cut the strips into squares.
I didn't like the unfinished edge and a plain zig zag just didn't do it for me, so I added some eyelash yarn to the edges with a zig zag.
I added beads to some of them. I punched a hole in each twinchie and added a grommet. I wound up having to buy a new hole puncher because the cheapie one I had fell apart in my hand after the first half dozen. I got really good at the grommets at the end -- I had a flower eyelet setter and after a while, they really looked like flowers. This is an inchie posing with the grommets and the setter.